This manual is compatible with all our Milwaukee Packout Accessories!
Pre-assembled for your convenience:
**Please note that we may not assemble these parts for some orders to prevent the set screws from getting lost. If this is the case, you will receive two set screws in a plastic bag, secured to our card. You can skip step 3, and assemble these parts together in step 7.
Step-by-Step Assembly Instructions
Step 1: Unscrew the aluminum bar using a Phillips head screwdriver.
Step 2: Pull down the aluminum bar to create enough space for the product.
Step 3: Ensure that the set screw is in line with the product and not protruding out of the product to be able to successfully insert the bar through.
Step 4: Align the product with the aluminum bar, and insert and push the part onto the bar.
Step 5: Push the aluminum bar back to its original place.
Step 6: Tighten the aluminum bar using a Phillips head screwdriver.
Step 7: Adjust the part on the bar at the desired position and tighten the set screw using an Allen Wrench. DO NOT OVERTIGHTEN, YOU MIGHT DAMAGE THE PART!!
HELP US IMPROVE OUR PRODUCTS!
Please take a moment to leave feedback so we can make our
products even better.
To purchase again: 3DBILITY AMAZON
Remember to check out our other Packout Modifications & Accessories!